This water bottling machine line is mainly used for filling drink water. It combines rinsing and filling and capping as one automatic body suitable for PET or other plastic bottles. The micro pressure filling operation of the new type is adopted enabling it to fill more efficiently and more stably with more output than the machine of the same level from others.

"Water treatment equipment" is a kind of equipment for filtering and purifying water by removing some harmful substances that are not needed for production and life through various physical and chemical means.

Water treatment equipment can be divided into sewage treatment equipment, raw water treatment equipment, water purification equipment, filtration equipment and ultra pure water equipment.

1.it does not change the chemical properties of water and has no side effects on human body.

2. The descaling effect is obvious. The equipment is installed in the water circulation system. If the original scale thickness is less than 2mm, it can gradually loosen and fall off in about 30 days. The treated scale is granular and can be discharged with the sewage pipeline without blocking the pipeline system. After the old scale falls off, no new scale will be produced within a certain range.

3. The equipment has small volume, simple and convenient installation, and can be used unattended for a long time.

4. After the water flows through the equipment, it can turn the water into magnetized water, and it can inhibit and kill the bacteria in the water.

5. It does not corrode the equipment and can prolong the service life of the servo equipment.

You can visit our website or contact us for more information!

Professional beverage mixing system with structure reasonable, mix precision is high, CO2 mixes fully, has two times of cooling, two carbonation merits. Mainly is suitable for kinds of carbonated drink's mix processing, also may use in the paste drink, the fermentation drink and so on other soft drinks' mix processing.

Injection molding machine is the main molding equipment that uses plastic molding molds to make thermoplastic or thermosetting materials into plastic products of various shapes.

Function of injection system: injection system is one of the most important components of injection molding machine. Generally, there are three main forms: plunger type, screw type and screw pre plastic plunger injection type. The most widely used is screw type. Its function is to heat and plasticize a certain amount of plastic within a specified time in a cycle of the injection molding machine, and then inject the molten plastic into the mold cavity through the screw under a certain pressure and speed. After the injection, the molten material injected into the mold cavity shall be kept in shape.

You can visit Alps website or contact us for more information!

Blow molding machine refers to a machine for blowing bottles. The simplest explanation is a machine that can blow plastic particles (softened into liquid) or finished bottle embryos into bottles through certain technological means. The bottle blowing machine is convenient and fast, with a large amount of molding. After its emergence, it replaced most manual bottle blowing and was adopted by most beverage enterprises.

Some bottle blowing machines are still two-step bottle blowing machines, that is, plastic raw materials must be made into bottle embryos before blowing. Nowadays, environmental protection plastics made of PET are commonly used. Blow molding machine: after the liquid plastic is sprayed out, the plastic body is blown and attached to the mold cavity of a certain shape by using the wind force blown out by the machine, so as to make the product. This kind of machine is called blow molding machine. It is also a kind of bottle blowing machine, namely hydraulic bottle blowing machine.

The tubular plastic parison obtained by extrusion or injection molding of thermoplastic resin is placed in the split mold while it is hot (or heated to a softened state). After the mold is closed, compressed air is immediately introduced into the parison to make the plastic parison expand and cling to the inner wall of the mold. After cooling and demoulding, various hollow products are obtained.

Contact us for more information!

Labeling machine is a device that pastes roll of self-adhesive paper labels (paper or metal foil) on PCB, products or specified packaging machine.

The types of products are divided into linear labeling machine and rotary labeling machine.

According to different adhesive coating methods, it can be divided into self-adhesive labeling machine, paste labeling machine (paste labeling machine, glue labeling machine) and hot-melt adhesive labeling machine.The utility model has a wide range of application and can meet the full circle labeling or semi circle labeling of round bottles. The labeling switching between bottles is simple and the adjustment is convenient.

You can visit our website or contact us for more information!

Packaging machine is a kind of machine that packages products, which plays a role of protection and beauty. The packaging machine is mainly divided into two aspects: 1 Assembly line integrated production packaging, 2 Product peripheral packaging equipment

Assembly line integrated production packaging is applied to filling (filling), sealing machine and coding of (bagged and bottled) products in food, medicine, daily chemical, hardware, lighting, furniture and other industries.

It mainly includes: packaging machine, filling machine, sealing machine, coding machine, vacuum machine, shrinking machine, vacuum packaging machine, weighing packaging machine, etc

We design the factory layout based on customer factory sizes, whole line design is based on famous brand motors and automatic lubricant system, and with less power consumption, and save space.