 |
ABM-6E
ALPS
8477401000
| Quantity: | |
|---|---|
Full automatic servo type linear blow molding machine is a high speed automatic PET blower designed and developed with the most advanced bottle blowing technology at present, the advantages of which can be described as speedy, stable, simple, general purposed and environmental safe. It is mainly applicable in blow molding cold filling and mesothermal filling PET containers for drinking water, beverage, food, daily chemical products, etc. The machine yields abundantly with high efficiency. The capacity of each cavity has been increased to 1750~1600bph from original 1000bph when the bottle size is equal to or less than 0.6L respectively, which can meet the high-end customer's requirements. Equipped with preform auto loading system, the machine works fully automatically with consistent performance and high speed, without any operator's interference during the whole processes. Accordingly, chance of contamination can be reduced manifestly, which assures the quality of products.
Model | ABM-A4 | ABM-6A | ABM-6E | ABM-9E |
Capacity (500ml/bottle/h) | 3500-4000 | 3200-4000 | 9000-9600 | 11000-12000 |
Max Volume | 2L | 6 cavities for 700ml 3 cavities for 1.5L | 6 cavities for 700ml 3 cavities for 1.5L | 9 cavities for 700ml 4 cavities for 1.5L |
Max Neck Diameter | 38mm | 38mm | 38mm | 38mm |
Max Bottle Diameter | 105mm | 70mm | 68mm | 68mm |
Cavity | 4 | 6 | 6 | 9 |
Total Power | 43KW | 65KW | 70KW | 79KW |
Running Power | 22KW | 35KW | 40KW | 55KW |
Working Pressure | 1.0Mpa | 1.0Mpa | 1.0Mpa | 1.0Mpa |
Low Pressure Air Consumption | 1.6m⊃3;/min | 2m⊃3;/min | 2m⊃3;/min | / |
Blowing Pressure | ≤3.0Mpa | ≤3.5Mpa | ≤3.5Mpa | ≤3.5Mpa |
High Pressure Air Consumption | 3.6m⊃3;/min | 4.8m⊃3;/min | 6.4m⊃3;/min | 9.6m⊃3;/min |
Machine Size | 4.5x1.6x1.9m | 4.75×2.05×2.1m | 4.5×2.3×2.3m | 5.5×2.3×2.3m |
Machine Weight | 3500kgs | 5500kgs | 7000kgs | 9500kgs |
1. Preform unscrambling system
Adopts one-way preform-feeding structure and preform-separating by servo motor structure which solve the preform block and abrasion problem.
*There are two photoelectric sensors to control preform-loading motor and preform-separating cylinder that will
warn the operator to add the preforms into the hopper when lacks preform instead of stopping the machine.
2. Preform heating system
*Perfect heating system design decrease power consumption.
*Special oven design helps power saving and easy maintain.
*Each lamp position and temperature can be adjusted.
*Cycle air-cooling system keeps the oven temperature constantly.
Full automatic servo type linear blow molding machine is a high speed automatic PET blower designed and developed with the most advanced bottle blowing technology at present, the advantages of which can be described as speedy, stable, simple, general purposed and environmental safe. It is mainly applicable in blow molding cold filling and mesothermal filling PET containers for drinking water, beverage, food, daily chemical products, etc. The machine yields abundantly with high efficiency. The capacity of each cavity has been increased to 1750~1600bph from original 1000bph when the bottle size is equal to or less than 0.6L respectively, which can meet the high-end customer's requirements. Equipped with preform auto loading system, the machine works fully automatically with consistent performance and high speed, without any operator's interference during the whole processes. Accordingly, chance of contamination can be reduced manifestly, which assures the quality of products.
Model | ABM-A4 | ABM-6A | ABM-6E | ABM-9E |
Capacity (500ml/bottle/h) | 3500-4000 | 3200-4000 | 9000-9600 | 11000-12000 |
Max Volume | 2L | 6 cavities for 700ml 3 cavities for 1.5L | 6 cavities for 700ml 3 cavities for 1.5L | 9 cavities for 700ml 4 cavities for 1.5L |
Max Neck Diameter | 38mm | 38mm | 38mm | 38mm |
Max Bottle Diameter | 105mm | 70mm | 68mm | 68mm |
Cavity | 4 | 6 | 6 | 9 |
Total Power | 43KW | 65KW | 70KW | 79KW |
Running Power | 22KW | 35KW | 40KW | 55KW |
Working Pressure | 1.0Mpa | 1.0Mpa | 1.0Mpa | 1.0Mpa |
Low Pressure Air Consumption | 1.6m⊃3;/min | 2m⊃3;/min | 2m⊃3;/min | / |
Blowing Pressure | ≤3.0Mpa | ≤3.5Mpa | ≤3.5Mpa | ≤3.5Mpa |
High Pressure Air Consumption | 3.6m⊃3;/min | 4.8m⊃3;/min | 6.4m⊃3;/min | 9.6m⊃3;/min |
Machine Size | 4.5x1.6x1.9m | 4.75×2.05×2.1m | 4.5×2.3×2.3m | 5.5×2.3×2.3m |
Machine Weight | 3500kgs | 5500kgs | 7000kgs | 9500kgs |
1. Preform unscrambling system
Adopts one-way preform-feeding structure and preform-separating by servo motor structure which solve the preform block and abrasion problem.
*There are two photoelectric sensors to control preform-loading motor and preform-separating cylinder that will
warn the operator to add the preforms into the hopper when lacks preform instead of stopping the machine.
2. Preform heating system
*Perfect heating system design decrease power consumption.
*Special oven design helps power saving and easy maintain.
*Each lamp position and temperature can be adjusted.
*Cycle air-cooling system keeps the oven temperature constantly.
