Views: 0 Author: Site Editor Publish Time: 2021-11-05 Origin: Site
Drinking water filling machine is mainly a small category of packaging machine products, from the degree of automation of production is divided into the semi-automatic filling machine and automatic filling production line. These devices are showing new trends: 1. Versatility. 2. High speed, high yield. 3. High technical content and strong reliability. What else do you know about drinking water filling machines?
Here is the content list:
●What are the main characteristics of drinking water filling machines?
●How does the drinking water filling machines work?
1, Drinking water filling machine is compact, perfect control system, easy to operate, high degree of automation Dead corner, easy to clean; 2, Drinking water filling machine using the high-speed filling valve, fluid level accurate and no fluid damage, to ensure that the filling process requirements; 3, The cap head using magnetic constant torque device, to ensure the quality of the cap, and will not damage the cap; 4, The use of efficient cap control system, with perfect self-control and protection devices; 5, Drinking water filling machine with a sound overload protection device, can effectively protect the safety of equipment and operators; 6, Control system with production speed control, missing cap detection, bottle self-parking and yield counting functions.
Drinking water filling machine by the transmission machinery driven, so that all aspects can coordinate the division of labor, and truly achieve the effect of linkage. The bottle track has a special infrared sensor to receive induction, when the bottle to a certain number, automatically will be the back of the bottle stuck, the current surface of the bottle filling, and then automatically released, so that the back of the bottle to fill the space, to achieve bottles do not fill, when the bottle into the filling head under the position, other working sections stop, only filling head work, when the bottle leaves, drinking water filling machine head stop work, track part of the work, stop the bottle. The clean bottle from the bottle washing machine is fed by the inlet belt into the bottle feed spiral of the drinking water filling machine, which is sent by the bottle star wheel to the cylinder of the swing table and raised. The bottle opening presses the lower part of the filling valve under the guidance of the fixed-center device to form a seal. After the bottle is vacuumed, the backpressure gas (CO) in the tank is flushed into the bottle, and when the gas pressure in the bottle is equal to the gas pressure in the tank, the liquid valve is opened under the action of the liquid valve spring. At this point, the object acts through the direction of the umbrella reflector ring on the return pipe. The CO in the glass bottle is automatically poured into the glass bottle along the wall and replaced into the reservoir through the return pipe. When an object rises to a certain height and closes the return pipe port. Stop the object automatically. The liquid and gas valves are then closed to remove the pressure gas from the bottleneck area to prevent the gas-carrying object from gushing when the glass bottle drops, thus completing the entire filling process.
Drinking water filling machines in the food industry, beverage industry, daily chemical industry, and other widely used. Zhangjiagang Alps Machine Co., Ltd has developed a variety of drinking water filling machines with great quality. If you want to buy one, you may want to consider using our products.